Menu Member



Part No
Optical Comp
Tx Power(dBm)
Rx Sens(dBm)
Temp (℃)
10GMS-30M-T 10GBASE-T CAT.6a/CAT.7 30m -- - - 0~70
10GMS-300M-SR 10.3G SFP+ SR 850mn MMF 300m VCSEL/PIN -1~-6 -11.1~-1 0~70
10GMS-10K-LRM 10.3G SFP+ LRM 1310nm MMF 220m FP/PIN 0.5~-6.5 -10.0~-1.5 0~70
10GMS-10K-LR 10.3G SFP+ LR 1310nm SMF 10km DFB/PIN 1~-3 -12.6~-0.5 0~70
10GMS-40K-ER 10.3G SFP+ ER 1550nm SMF 40km EML/PIN -1~4 -14.1~-0.5 0~70
10GMS-80K-ZR 10.3G SFP+ ZR 1550nm SMF 80km EML/APD 0~4 -23.0~8 0~70
10GMS-40K-CM 10.3G SFP+ CWDM  SMF 40km EML/PIN -0.5~4 -14.1~0.5 0~70

10.3G SFP+ CWDM SMF 80km

EML/APD 0~-4 -23.0~8 0~70

10.3G SFP+ DWDM SMF 40km

EML/PIN -2~3 -16~0.5 0~70

10.3G SFP+ DWDM SMF 80km

EML/APD 0~5 -24~-6 0~70

10.3G SFP+ BIDI TX1270/RX1330 SMF 10km

DFB/PIN -5~0 -14~0.5 0~70

10.3G SFP+ BIDI TX1330/RX1270 SMF 10km

DFB/PIN -5~0 -14~0.5 0~70

10.3G SFP+ BIDI TX1270/RX1330 SMF 20km

DFB/PIN -2~2 -14~0.5 0~70

10.3G SFP+ BIDI TX1330/RX1270 SMF 20km

DFB/PIN -2~2 -14~0.5 0~70

10.3G SFP+ BIDI TX1270/RX1330 SMF 40km

DFB/PIN 1~5 -15~0.5 0~70

10.3G SFP+ BIDI TX1330/RX1270 SMF 40km

DFB/PIN 1~5 -15~0.5 0~70

ADOP SFP Optical Transceivers are hot-swappable, compact media connectors that provide instant fiber connectivity for your networking gear. They are a cost effective way to connect a single network device to a wide variety of fiber cable distances and types.

By eliminating the need to maintain surplus units/ devices of various fiber types for network repairs or upgrades Small Form Pluggable Optical Transceivers reduce network equipment inventories. SFPs allow one product the flexibility to expand by speed (Fast Ethernet and 1, 10, or 40 100 Gigabit), and/or distance (220 m to 80 km).

Network upgrades are also made easier because SFPs are interchangeable fiber connectors that can adapt to any existing network. For example, by simply replacing the pluggable optical transceiver, a media converter that was originally used in a multimode network can be re-configured to operate over a CWDM network.

ADOP SFP Optical Transceivers can be used and interchanged on a wide variety of Cisco or MSA compliant SFP products. They can be intermixed in combinations of sfp+ sfp28 qsfp+ qsfp28 on a port-by-port basis.

ADOP SFP Optical Transceivers are designed for use with ADOP SFP Media Converters, Industrial Ethernet Switches, IOLAN SCG Console Servers and third party equipment that supports SFP transceivers. Select the appropriate tab above to view Duplex, Simplex( BiDi ), CWDM or 10 Gigabit SFP+ and XFP Models.


Data Rate: 1.25Gb/s
Interface: RJ-45
100 meters transmission over CAT.5e
Compliant with IEEE 802.3ab
Compliant with SFP MSA
Hot Pluggable SFP footprint
+3.3V single power supply
Temp. Range(℃): 0~70


10GBase-T Data Rate: 1.25G/10G, multi-rate
Interface: RJ-45
30 meters transmission over CAT.6a/CAT.7
Compliant with 10G Base-T IEEE 802.3an
Compliant with 1000Base-T IEEE 802.3ab
Compliant with 100Base-TX IEEE 802.3u
Temp. Range(℃): 0~70

ADOP's SFP-1GE-T-AD is a 1000Base-T Copper RJ45 SFP Transceiver, designed in with Marvell 88E1111 PHY chip following IEEE 802.3ab and SFP MSA, supporting up to 100-meter transmission over CAT.5e.

ADOP's SFP-GE-T-PLUS is a mult-rate Copper RJ45 SFP Transceiver, designed in with Marvell 88E1111 PHY chip following IEEE 802.3ab and SFP MSA, supporting up to 100-meter transmission over CAT.5e. This module is recommended only if your device supports 100/1000M auto-negociation, otherwise please DON'T choose this item, choose ADOP PN: SFP-1GE-T-AD instead.

The 10GBase-T copper transceiver module is a high performance integrated duplex data link for bi-directional communication over copper cable. Durable and Low Power Consumption – Less than 2.5W power dissipation and heat-conducting gasket provide superior heat dissipation function to dissipate heat away from module and increases its service life.
It is specifically designed in with Marvell 88X3300 PHY chip following IEEE 802.3an and SFP+ MSA.

Robust Media Converter Icon

Robust Chip Power

ADOP only uses high-end components from leading chip manufacturers to ensure product reliability. ADOP's advanced implementation of Link Pass-Through includes an onboard processor that continuously monitors the status of the links and sends a notification if the fiber connection is broken or disconnected.

Cisco Compatible icon

SFP+ Compatible Cisco

ADOP SFP+ Transceiver are compatible with Cisco switches and routers. As a key component in the reliability and stability of your network, you need dependable Media Converters with seamless interoperability.

Centralized Management Icon

Reliable SFP+ Transceiver

Most SFP+ Transceiver manufacturers do not publish (or make very difficult to find) their MTBF’s. ADOP is proud to publish the high MTBF rates on the Hardware Specs for each product. In addition, we provide the best-in-class Lifetime Warranty.

Secure icon

Safe and Efficient

ADOP SFP+ transceivers are compliant with IEEE802.3ae, SFF-8083, SFF-8472 and SFF-8431, SFF-8461, with features of Low Power Consumption.
They are designed for applications of Data Centers, Metro Network, Wireless Network and Transmission network.

Technical Support icon

Technical Support

We have sales and technical support staff around the globe to support you. If you need help choosing the best product compatibility for your application, we provide technical consultations by phone or email. And, even though ADOP SFP+ Transceiver are extremely easy to install and configure, post sales support is easy to contact.

Trust icon


ADOP has been providing reliable device connectivity solutions since 2003. That’s over 10 years of experience that businesses around the globe have come to trust to deliver superior connectivity technology for mission critical applications.

back to top